Black Dragon Exhaust & GP mufflers
These are custom built to spec and i can get them in most lengths and styles
Options available:
Now
available to offer removable baffle for the end tips for track days upon request
Now Available Titanium end caps
for a extra $50 per muffler
I can get carbon sleeves, titanium sleeves, stainless, and blue scorched as well
several core sizes including, 50mm as well as 60mm
Several end caps including, rolled 45 degree tips, straight
45 degree tips, straight tips, as well as slash cut tips and carbon conical ends.
Different sleeve lengths from
200mm to 500mm
Shapes available are tri oval, round, oval, and taper
I also can supply replacement sleeves
for most round and oval muffler sizes from 77mm to 130mm. I can supplt most muffler straps as well as rivets, packing, springs
etc
New titanium end caps |
|
very light and very sharp looking |
NEW ti dual baffle tri oval can |
|
semi gloss black and super silver ceramic coating |
|
available for slip-ons, fulls or cans |
|
Titanium sleeve, ti end caps |
|
$350 per muffler |
Ti end next to polished SS |
|
Ti ends are $50 per muffler more |
300mm Length with rolled tips in a 60.5mm inlet |
|
$275 each with laser cut strap |
Weight of the 300mm length 86mm round GP muffler |
|
carbon conical end cap on a tapered muffler |
|
GP rounds on ceramic coated Mid pipes |
|
Honda RC51 |
300mm carbon GP's |
|
Sato ti mid pipes |
Ducati with 300mm stainless can |
|
Simonkobe all ti muffler |
|
a weight comparo |
2002+ rc51 stainless slip-on set |
|
low mount slip-ons with stainless GP cans |
Custom 03 R1 project |
|
slash cut can as well as a black ceramic coating on all |
slash cut stainless can |
|
$225 each |
carbon tri ovals on yosh mids |
|
$275 each |
new large weave carbon sleeve |
|
2003 R1 with ceramic coating and stainless GP can |
|
custom carbon hangers too |
Custom 450mm x 86mm round |
|
Custom made 2-2 full exhaust |
|
$1500 |
Enter content here
RC51 full exhaust Merge pic |
|
2-2 Rc51 full with custom pipe guards |
|
Yamaha R6 with Black Dragon Muffler |
|
$275 |
R6 with muffler |
|
http://www.youtube.com/watch?v=je9OiT5JpUo |
Slash cut 240mm length muffler |
|
240mm rounds with ti ends |
|
Custom Ducati carbon muffler |
|
|
ti endcap on a 86mm diameter sleeve |
|
feather light |
18" carbon replacement sleeve |
|
can supply sleeves in carbon or stainless to suit most pipes |
450mm next to a 300mm GP can |
|
300mm stainless |
|
RC51 2-1 full exhaust |
custom billet adapters |
|
60.5 x 57.5mm $50 each |
300mm length stainless 54mm inlet |
|
Slash cut end tip $225 each |
Custom R1 240mm carbon GP cans and 300mm stainless |
|
Carbons $275 each |
Custom 240mm carbons |
|
2004 Yamaha R1 slip-0n |
300mm rounds on sato mids |
|
$275 each |
Another 2-1 with stainless GP can under rebuild |
|
I have billet adapters ti fit the 2-1 for another $50 each |
Enter content here Product Review
It sounds like there might have been some rumblings about the quality/fit
of this product. Having bought a set, here is my feedback. I got these to replace the Termis I have on my 07. I had a chain
break that punched a hole in one and replacing one of these bad boys is pretty much not an option. So, I decided to give these
carbon sleeves a shot.
When they showed up, I was a little skeptical because the Termis are oval cans and what
I got were round. Also, these are about half the thickness of the Termi cans which are so thick you could probably stand on
them and they wouldn't flex. However, these flexed to the round shape and fit PERFECTLY. They could not have been any
tighter or any looser. The fit was dead on!
Throughout this process, I spoke with Mark a few times and he was
very good about keeping an open line of communication. While I wouldn't say these sleeves are the same quality as what
Termi cranks out, I will say that it was a great solution for me. They are made well and I would put them on par with a lot
of the other stuff that comes on aftermarket cans today. Buy with confidence!
Below are some photos of the product.
Comparison of cans (note, I took this opportunity to shorten the cans by an inch and a half):
Stainless slip-ons RC51 |
|
300mm |
08 CBR1000rr slip-ons |
|
240mm cans with 51mm inlets and 60mm cores |
|
http://s7.photobucket.com/albums/y297/metalscorpio/?action=view¤t=MOV00739.flv |
04-06 R1 on Sato pipes |
|
$500 a pair |
Brians Leo pipes with large core GP cans |
|
$275 each |
09 GSXR1000 slip-on |
|
dual 240mm GP mufflers |
Custom titanium sleeve large bore 3" 450mm long |
|
NEW RSV4 slip-on |
|
many muffler options to choose from |
ZX10r with ti end capped muffler |
|
Ti end large core can on a akra pipe |
|
|